Beer Dottle Wrapping Foil

Beer Dottle Wrapping Foil


1. Purpose

To Establish Definitive Quality Standards On Foil Rolls, Thereby Minimizing Claims Attributable To Any Lack Of Understanding Between Supplier And Customer.

2. Objective

This Specification Covers 8011 Alloy Foil Master Rolls For Beer Bottle Wrapping Foil And Describes The Quality Attributes Of The Master Foil Rolls.

3. Physical Requirements

3.1. Alloy And Temper

Alloy And Temper Should Correspond To Table 1


















3.5. Surface Condition

3.5.1. The Surface Shall Be Cleaned And Free From Inclusions, Scratches, Wrinkles, Cracks, Overlapping Or Other Internal Defects.

3.5.2. There Will Be No Adhesion Or Tearing When The Roll Is Unfolded, And The Free Uncoiling Length Should Be 150cm Max.

3.5.3. One Side Is Bright, The Other Side Is Dull. The Bright Surface Is Usually At The Outer Side Of The Roll, And The Dull Surface Is At The Inner Side Of The Roll.

3.5.4. Pin-Holes











a) All Splices to be Ultrasonic/Tape.

b) It is Allowed one Splice Per Roll. (Max. Once Per 2000 m)

c) Marked At The Roll Edge With a Film, Placed Close to The Splice.

3.5.6. Wettability

The Wettability Corresponds to a Grade Quality.

4. Packing and Shipping Requirements

4.1. Quantities – As Specified on The Purchase Order With a Tolerance of +/- 10% Unless Otherwise Stated on The Order.

4.2. Packaging – Foil Rolls are to be Packed In Collapsible Aluminum Racks or Steel Racks As Specified In Such a Manner That Normal Handling By Common Carrier Will Ensure Safe Transportation Without Damage To The Foil. This Includes Wrapping to Protect The Foil From Water Stain and Corrosion.

4.3. Identification – Each Roll Shall be Identified With The Following:

a) Order Number (Release Number)

b) Part Number (From Rmc Purchase Order)

c) Gauge (mm)

d) Width (mm)

e) Net Weight (kg)

Contact us if you need more details on Aluminium Bare Foil. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Aluminium Beer Foil、Bottle Wrapping Foil. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Aluminium Foil